Homeseer WX300-R2 ZWave Smart Dimmer and Switch

描述

The HomeSeer WX300-R2 ZWave Switch can be run as either a dimmer or on/off switch by simply changing it’s operating mode.  It can be installed with or without a neutral wire, making it adapt to pretty much any installation scenario.

The WX300 also has a number of unique features that make it stand out from the competition.  For starters it has 7 RGB LED indicators that can show the light status or dim level.  Or they can also be programmed to change colour or blink to show a special status. The indicators are controlled by special ZWave commands.

Multi-tap and press-and-hold functions allow for special triggers of up to 5 taps for 14 possible triggers.

Note that special features require a compatible hub such as Hometroller.  For other hubs please check with the hub vendor to see if they support these extra features.

WX300-R2 is firmware upgradeable when used with a compatible interface that supports firmware updating.

HS-WX300 is now HS-WX300-R2 as of early 2023.

NOTE: Supports LED, CFL and incandescent lighting.  It does NOT support fans, pumps, fluorescent fixtures or other non-lighting loads.

 

HomeSeer HS-WX300 Z-Wave Plus Scene-Capable RGB Smart Dimmer & Switch Features:

• Versatile: May be configured to work as DIMMER or ON-OFF switch
• Does NOT require a neutral wire | perfect for older homes
• Includes 7 individually controllable RGB LED dimmer status indicators | Color & blink status of LED indicators are controlled with Z-Wave commands
• Scene Controler: Support multi-tap and press & hold event triggers up to 5 taps (14 possible triggers)
• Supports instant status when controlled locally
• Compatible with HomeSeer (and many other) home controllers
• Supports S2 Security
• Works with Alexa and Google Home (hub required)
• Easy ‘screw terminal’ installation
• Works with HS-WA100+ wall companion for 3-way, 4-way and 5-way circuits
• Includes Z-Wave signal repeater feature
• The smart bulb feature decouples load control and allows the WX300 to be used exclusively as a controller.
• The paddle toggle feature allows any paddle press (top or bottom) to be used to turn lights on and off. This feature provides easier manual operation for users with accessibility issues.
• The default dim level feature allows users to set the dim level that the switch goes to when turned on via the paddle.
• LED indicator light level feature allows users to change the indicator light intensity.

HomeSeer HS-WX300 Z-Wave Plus Scene-Capable RGB Smart Dimmer & Switch Specifications:

• Compatible with US Z-Wave networks (908 MHz)
• 120 VAC, 60Hz
• Max Load: 600-watt incandescent
• Max Load: 300 watts LED / CFL
• Min Load: 24W (0.2A)
• Operating Temps: 0 – 40C
• Supports Z-Wave Plus features (800 series)
• Supports Z-Wave S2 security
• cUL, FCC, Z-Wave Plus certified
• Forward Phase Dimmer
• Color: White.

Note:  The HS-WX300 works with any Z-Wave certified smart hub however special features require a compatible hub like Home Troller / Home Seer or SmartThings